Dräger PIR 7000, Instructions For Use Manual

Page: 27 / 420

27
Substances other than those named in the table may be detected by the gas transmitter and result in a display.
Adjustable parameters
The gas transmitter contains adjustable parameters that can be individually configured with a PC and the Dräger PolySoft software or with a HART
®
remote control.
Dräger PIR 7000 Type 334 Dräger PIR 7000 Type 340 Dräger PIR 7200
Methane Propane Ethylene Propane Methane Carbon dioxide
Response time, t0...50 / t0...90 ("fast" response)
without accessories: < 1 s / < 1 s < 1 s / < 1 s < 1 s / < 1 s < 1 s / < 1 s < 1 s / < 1 s < 1 s / < 1 s
with process adapter/process
cuvette
Flow 0.5 L/min
Flow 1.0 L/min
Flow 1.5 L/min
Flow 10 L/min
< 3 s / < 9 s
< 3 s / < 5 s
< 2 s / < 4 s
< 2 s / < 2 s
< 3 s / < 9 s
< 3 s / < 5 s
< 2 s / < 4 s
< 2 s / < 2 s
< 3 s / < 9 s
< 3 s / < 5 s
< 2 s / < 4 s
< 2 s / < 2 s
< 3 s / < 9 s
< 3 s / < 5 s
< 2 s / < 4 s
< 2 s / < 2 s
< 3 s / < 9 s
< 3 s / < 5 s
< 2 s / < 4 s
< 2 s / < 2 s
< 3 s / < 9 s
< 3 s / < 5 s
< 2 s / < 4 s
< 2 s / < 2 s
NOTICE
Modifications to the specified configuration must be noted on the configuration label in the transmitter housing.
Dräger PIR 7000 Type 334 Dräger PIR 7000 Type 340 Dräger PIR 7200
Measured gas and measurement range, factory
setting
Methane
0 to 100 %LEL
Propane
0 to 100 %LEL
Carbon dioxide
0 to 10 vol. %
Measured gas, optional settings
1)
1) Up to max. 10 additional gases/vapours can be loaded.
methane, propane, ethylene propane, methane
Measurement unit,
optional settings
%LEL / vol. % / ppm vol. % / ppm
Measurement range,
optional settings
2)
2) Consult the manufacturer for measuring range limits for other approved substances.
Methane
0 to 15...2000 %LEL
0 to 1...100 vol. %
Propane
0 to 20..0.100 %LEL
Ethylene
0 to 25..0.100 %LEL
Propane
0 to 5..0.100 %LEL
0 to 850...21000 ppm
Methane
0 to 15..0.100 %LEL
Carbon dioxide
0 to 0.2...100 vol. %
0 to 2.000...1.000.000 ppm
Capture value limits at zero
3)
upper limit, optional settings
upper limit, factory setting
lower limit, factory setting
lower limit, optional settings
3) For applications in accordance with BVS 08 ATEX G 001 X capture value limits and capture value must not deviate from the full-scale deflection by more than ±5 %.
Methane
0...2200 ppm
750 ppm
-750 ppm
0...-1000 ppm
Propane
0 to 850 ppm
315 ppm
-315 ppm
0 to -850 ppm
Ethylene
0 to 1150 ppm
405 ppm
-405 ppm
0 to -1200 ppm
Propane
0 to 425 ppm
85 ppm
-85 ppm
0 to -850 ppm
Methane
0 to 2200 ppm
750 ppm
-750 ppm
0 to -1800 ppm
340 to 1000 ppm
540 ppm
140 ppm
340 to -1000 ppm
Capture value at zero,
factory setting
optional settings
3)
0 ppm
can be selected within the defined capture value limits
340 ppm
can be selected within the
defined capture value limits
%LEL calculation, factory setting
4)
optional settings
5)
4) At its location of use, the gas transmitter may be subject to other LEL values depending on applicable regulations.
5) The specified values can be individually changed by ±25 %.
Category 1: NIOSH Pocket Guide (Methane: 5,0 vol. %, propane: 2,1 vol. %, ethylene: 2,7 vol. %)
Category 1: NIOSH Pocket Guide (Methane: 5,0 vol. %, propane: 2,1 vol. %, ethylene: 2,7 vol. %)
Category 2: IEC 60079-20 (methane: 4,4 vol. %, propane: 1,7 vol. %, ethylene: 2,3 vol. %)
Category 3: Brandes / Möller, ISBN 3-89701-745-8 (methane: 4,4 vol. %, propane: 1,7 vol. %, ethylene: 2,4 vol. %)
Category 4: RUS (methane: 4,4 vol. %, propane: 1,7 vol. %, ethylene: 2,3 vol. %)
Category 5: LKLV (methane: 4,4 vol. %, propane: 1,7 vol. %, ethylene: 2,3 vol. %)
---