Instructions for use Babylog 8000 plus SW 5.n
141
Technical data
Device outputs
Analog and digital interface (optional)
All outputs on the analog/digital interface are electri-
cally isolated from the device electronics. Electric
strength: 1.5 kV.
Analog-1 and Analog-2 outputs
The outputs are short circuit proof. Each voltage is
output via a 12-bit DA transducer with downstream
low-pass filter.
Signal delay
Electronic filter circuits in the device delay the sig-
nals for airway pressure and flow by approx. 15 ms
compared to sensor signals. When a separate mea-
suring device is used and its signal is compared to
the analog output of the device, this delay must be
taken into consideration.
Output resistance
Approx. 10 k
Ω
Plug connection
SMB-Subclic
Impulse output
The output is short circuit proof.
High-level voltage
5 V ±0.5 V, no load
Low-level voltage
0 V ±0.5 V, no load
Output resistance
<5 k
Ω
Plug connection
SMB-Subclic
RS232 interface
Level in accordance with DIN 66020
Printer connection
With 8306489 printer cable only
Pin configuration
Monitor connection
With 8306488 monitor cable only
Pin configuration
SROH6XE'
SOXJ
SROH6XE'
SOXJ
3OXJKRXVLQJ
'HYLFH
+37KLQNMHW
SROH6XE'
SOXJ
SROH6XE'
VRFNHW
3OXJKRXVLQJ
'HYLFH
0RQLWRU