Operating Instructions
General Remarks
© Copyright by Markem-Imaje CSAT GmbH
ITS6_135_Manual_EN.doc
Subject to Technical Modifications
Page 13 / 370
ther claims for damages, irrespective of the legal basis on which they arise,
are excluded.
Liability or warranty is excluded if:
the information and directions in these operating instructions are disre-
garded,
if error messages or problems arise on the machine and are ignored
and accepted without rectifying them,
if the machine, including any associated equipment, is operated im-
p
roperly or if it isn’t handled in the manner specified,
if the machine is misused contrary to its original purpose,
if safety equipment is not used or is deactivated,
the printer is operated without being supervised,
if functional changes of any kind are made without our written permis-
sion,
if printing substrates are used, which endanger the security process of
the print heads or the entire printer,
if printing substrates, inks, cleaning fluids or cleansers are used which
have not been approved and released by Markem-Imaje CSAT GmbH
or which do not meet the customary specifications.
if the relevant safety regulations are not observed (see related chapter
in these operating instructions),
if the machine, including any associated equipment, is maintained im-
properly (in terms of time intervals as well as execution)
– this also in-
cludes the use of original replacement parts
– and checks and inspec-
tions are not complied with,
if changes, additions or conversions which could compromise safety
are made to the machine without the authorization of Markem-Imaje
CSAT GmbH. This also applies to the installation and adjustment of
safety equipment and safety-related components.
In addition, the following conditions apply:
Expendable parts are not covered by the manufacture
r’s warranty.
Only manufacturer approved, original replacement parts should be
used when replacing parts or purchasing spare parts.
Whenever warranty claims are to be asserted, the factory must be in-
formed of this fact in writing, as soon as the defect is discovered, along
with the notation of the printer serial number and the exact description
of the unit or assembly (include serial number of the part/assembly if
available).
If damage or defects are rectified on the part of the customer or others
without prior approval by Markem-Imaje CSAT GmbH, then Markem-
Imaje CSAT GmbH is not obligated to acknowledge the demands or
claims.
