background image

Functions (product delivery)  - 1

Version 1.36

02/2004

5D. Product delivery

There are no complicated disassembly procedures or adjustments regarding product delivery system.
This chapter consists therefore of a brief overview.

Overview product delivery parts

Trough

1.

Hot water channel

2.

Coffee channel

3.

Mixing chamber

4.

Retaining magnet

5.

Magnet for trough detection

The product delivery area consists of just the
trough and the drip tray with the grille
on which the cups, mugs or pot can be placed.

Inside the trough there are two separate
channels to deliver coffee or hot water.
The front channel guides the water coming
from the hot water valve to the hot water
delivery spout, whereas the rear channel
guides water from the coffee valve to the
coffee delivery outlet.
The latter guides the water through a circular
area in which the water is mixed with incoming
concentrated coffee dosed by the B2 dosing
system.
The trough is equipped with a lid from serial
no. 0128XXXX to prevent that coffee in the
trough can pollute surrounding machine parts.
Following this change the outlets are
positioned more to the front. The position of
the grid holes of the drip tray grid have been
repositioned accordingly.

The presence of the trough is detected by
means of a reed sensor. If the trough is not
placed, the safety circuit is activated and all
main functions (except for cooling) are
blocked.

Delivery area parts

1.

Cup grille

2.

Drip tray

3.

Trough

4.

Reed sensor

1

2

3

4

1

2

5

4

3

Summary of Contents for Cafitesse 50











































































































Reviews: