Douwe Egberts Cafitesse 50, Service Manual

Page: 41 / 106

Functions (water) - 1
Version 1.36
02/2004
5A Water system
1. Disassembly and Adjustments
A. Boiler replacement
1. Unplug the power cord of the machine.
2. Empty the boiler:
• Remove the left cover, take the drain hose and hold the end of the hose above the boiler.
• Remove the plug of the drain hose.
• Squeeze the hose to prevent that water flows out of the hose.
• Lower the end of the hose above a suitable container (boiler volume is 1,8 litres/60.9 fl oz).
( Warning: boiler can contain very hot water )
• Hold the hose in position until the boiler is completely empty.
• Put the plug back onto the hose.
3. Disconnect the water inlet hose (A), the connector of the heating element (B) and the connector
of the boiler wiring (C), the outlet tubes (D) and the overflow hose (E).
• Allow the water in the water inlet hose to flow out into a container. Use a cloth to wipe off
any spilled water.
Overflow
hose
Connector,
boiler wiring
Water inlet
hose
Drain hose
Heater
connector
Hose Plug
Water inlet valve
A
Outlet
tubes
C E
D
B
Boiler disassembly
(standard machine with removable water tank)