Doremi IMS1000 Installation And User Manual Download Page 19

Page: 19 / 310

IMS.OM.002949.DRM

Page 19 of 310

Version 1.4

Doremi Labs

Software License Agreement

The software license agreement can be found at the following location:

http://www.doremilabs.com/support/cinema-support/cinema-warranties/

Hardware Warranty

The hardware warranty can be found at the following location:

http://www.doremilabs.com/support/cinema-support/cinema-warranties/

HDMI

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other

countries.

Summary of Contents for IMS1000























































































































































































































































































































Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands

Doremi IMS1000, Installation And User Manual

Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands