IMS.OM.002949.DRM
Page 81 of 310
Version 1.4
Doremi Labs
7
Shut Down
In order to properly shutdown the IMS1000 board and the projector, the user must follow the
steps below.
To shut down the board, go to Administration → System (Figure 91).
Figure 91: Shut Down
Click on the Shutdown button and wait two minutes. The LED lights on the IMS1000 will
stop flashing and the HDD lights will have a steady light once it has finished shutting
down.
After two minutes, refer to the projector manufacturer manual for proper power down
sequence to shut down the projector.
The IMS1000 board and the projector have now been properly shut down.
Warning
: The IMS1000 must be shut down according to the designated method. Failure to
follow the above method may result in file corruption.
Shutdown
Button
