Doremi IMS1000 Installation And User Manual Download Page 221

Page: 221 / 310

IMS.OM.002949.DRM

Page 221 of 310

Version 1.4

Doremi Labs

13.9 Ingest Manager

The Ingest Manager GUI (Figure 273)

can be accessed by going to Control → Ingest Manager.

It will only show items that can be supported by the IMS1000. Text, documents, pictures, power-
point presentations, etc. will not appear.

13.9.1 Ingest Scan

The Ingest Manager Tab automatically opens the Ingest Scan tab.

Figure 273: Ingest Scan

Note:

Compositions (CPLs), Key Delivery Messages (KDMs), Doremi License Messages

(DLMs), and Show Playlists (SPLs) can all be ingested through the Ingest Manager GUI.

13.9.1.1

Content Types

Different types of content can be displayed in the Ingest Manger GUI window.

●

Reel icons

represent a Composition Package which contains audio-video content

(e.g., features, trailers, etc.).

●

Speaker and Film icons represent individual compositions within a Composition

package.

●

Film icons represent Show PlayLists (SPLs), which contain the main feature and

trailers.

Ingest

Button

Refresh

Button

Location

Summary of Contents for IMS1000























































































































































































































































































































Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands

Doremi IMS1000, Installation And User Manual

Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands