Doremi IMS1000 Installation And User Manual Download Page 167

Page: 167 / 310

IMS.OM.002949.DRM

Page 167 of 310

Version 1.4

Doremi Labs

12.17.3

Restoring the Configuration Files

Figure 191: Restore



To restore the configuration files now, click on Yes.



A confirmation window will appear, asking to proceed with the restoration process.

Click on Yes.



A log in window will appear. Enter the appropriate password and click on Ok.



The restore process will now begin (Figure 192).

Note:

You may cancel at any time by clicking on the Cancel button.

Figure 192: Restore Process Window



Click on the Close button to exit out of the Restore window.



To view the backup, go to the Restore Backup tab.



The restore process is now complete.

12.17.4 Manual Back Up and Restore

Note:

This section assumes the user wants to manually back up or restore the configuration

files at any time. The user can back up or restore the configuration files to a local drive (RAID)
or to an external drive (e.g., e-SATA or USB).

Back up or restore cannot be performed while unit is in playback.

Yes Button

Summary of Contents for IMS1000























































































































































































































































































































Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands

Doremi IMS1000, Installation And User Manual

Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands