Doremi IMS1000 Installation And User Manual Download Page 23

Page: 23 / 310

IMS.OM.002949.DRM

Page 23 of 310

Version 1.4

Doremi Labs

Introduction

1.1 Purpose

This manual is intended to demonstrate to the user how to install, operate, and use the software
on the IMS1000 Integrated Media Server.

1.2 Software Version



This manual is intended for use with software version 2.6.4 and higher.



This manual is intended for use with Web GUI version 1.1.7.



The SM Version is:

6.0.14 and higher for Series-2 Projectors.

1.3 Contact Technical Support

If in need of help or assistance, please contact Doremi Labs Technical Services:

USA

24/7 Technical Services line: + 1-866-484-4004
Technical Services Email:

[email protected]

Europe

24/7 Technical Services line: + 33 (0) 492-952-847
Technical Services Link:

http://support.doremitechno.org/ticketing

Japan

Technical Services line: + 044-966-4855
Technical Services Email:

[email protected]

Australia ~ China ~ India ~ Indonesia ~ Korea ~ Malaysia ~ New Zealand ~ Philippines ~
Singapore ~ Taiwan ~ Thailand

Technical Services Email:

[email protected]

Summary of Contents for IMS1000























































































































































































































































































































Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands

Doremi IMS1000, Installation And User Manual

Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands