Doremi IMS1000 Installation And User Manual Download Page 30

Page: 30 / 310

IMS.OM.002949.DRM

Page 30 of 310

Version 1.4

Doremi Labs

Figure 3: IMS1000 with Barco Faceplate

Figure 4: IMS1000 with Christie Faceplate

Ethernet

● The IMS1000 has two built-in Gigabit Ethernet connectors. The left one is identified as

ETH1 and the right one is identified as ETH0.

eSATA

● Used for ingesting content at four times the maximum transfer rate of USB 2.0.

USB

● There are three USB 2.0 ports on the front panel that can accommodate an external

USB device, such as the CaptiView transmitter or USB external drive for content
ingestion.

HDMI



To be used for inputting of alternative content, i.e., Blu-ray Disc player, Gaming, Digital

Cameras or Laptop presentations.



HDCP (High-bandwidth Digital Content Protection) supported

Summary of Contents for IMS1000























































































































































































































































































































Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands

Doremi IMS1000, Installation And User Manual

Search results

Summary of Contents for IMS1000

Reviews:

Related manuals for IMS1000

Brands by name

Popular brands