Doosan DX190W, Operation And Maintenance Manual, Page: 149 / 315

OP000529
3-5
Operation
5. Turn starter switch to (START) position (Figure 7).
Engine should start in approximately 5 seconds.
6. After engine has started, release key. Key will return to the
"I" (ON) position (Figure 7).
7. Follow procedures in “Hydraulic System Warm-up” on
page 3-10.
8. After warming unit, check all operating indicators to make
sure that all engine systems (oil pressure, coolant, etc.) are
in the normal operating range. If any problems are noticed,
shut down engine. Normal indicators are:
FG000085
O
I
Figure 7
WARNING!
If the engine does not start after approximately 15
seconds of cranking, release the starter switch. Wait
about 5 minutes and repeat above step.
" "
FG006181
O
I
Figure 8
Figure 9
02/05 [MO] 11:30
E/G SPEED
1700
RPM
FG007104
4 5 6 7
2
3
1
CHECK
P
No. INSTRUMENT PANEL LIGHT OR GAUGE
INDICATOR
READING
1 Engine Coolant Temperature Gauge Blue Range
2 Fuel Gauge Blue Range
3 Hydraulic Oil Temperature Gauge Blue Range
4 Charging Warning Light OFF
5 Engine Oil Pressure Warning Light OFF
6 Engine Coolant Temperature Warning Light OFF
7 Engine Check Warning Light OFF