Doosan DX190W, Operation And Maintenance Manual

Page: 137 / 315

OP000528
2-69
Operating Controls
Closing the Window
1. Lower bucket to ground.
2. Set safety lever (Figure 150) on "LOCK," and shut down
engine.
3. Holding upper handles (1, Figure 152) of front window with
left and right-hand, pull lock levers (2, Figure 152) to
release the lock.
4. Push window forward, and lower it slowly.
5. When the bottom of the window, reaches the top of the
front bottom window, push the front window to engage the
lock (2, Figure 151).
6. Check that lock levers are securely latched in the lock
position.
Front Bottom Window
The front bottom window can be removed and stored in the rear
of the cabin.
1. After stowing the front upper window in the cabin ceiling,
remove bottom window (1, Figure 153) from cabin in
direction of the arrow.
2. Set bottom window in rubber holders (2, Figure 154)
behind operator's seat. Secure window with left and right
knobs (3) with push button (4).
1
2
FG000193
Figure 152
WARNING!
Be careful that your hands are not caught in window frame.
1
FG002255
Figure 153
Figure 154
3
4
2
FG001345
WARNING!
Never have wet hands when handling a window. Never
drop window or let it come into contact with other
parts of the machine.