manualshive.com logo in svg

Doosan DX190W, Operation And Maintenance Manual, Page: 12 / 315

Share
Download
Doosan DX190W Operation And Maintenance Manual Download Page 12

OP000527

Safety
1-6

1. Warnings for Operation, Inspection 

and Maintenance (190-00742, 
190-00092)

2. Warnings for High Voltage (190-00689, 

190-00096)

AVOID DEATH OR SERIOUS INJURY. - READ AND UNDERSTAND
OPERATION MANUAL AND SAFETY LABELS prior to operating
this machine.

190-00742

190-00092

Never get in under the machine while it is being jacked up
with boom and arm.

Sound the horn to alert the people nearby before operating,
and make sure that all persons are clear of area.

Controls may be changed for attachments or operator
preference. Try control pattern before operating.

FG007284

ARO1090L

DANGER

SERIOUS INJURY OR DEATH BY
ELECTROCTION can occur if
machine or attachments are
not a safe distance from electrical
power lines.

Line voltage

Safe Distance

6.6 kv

66.6 kv

275.0 kv

At least 3m(10ft)
At least 5m(16ft)

At least 10m(33ft)

190-00689

190-00096

Summary of Contents for DX190W




























































































































































































































































































































Reviews:

No comments