6555-065-A-12-18
4
SPECIFICATIONS
Model #
6555-381
Use this manual for the Model 6555 operators with circuit board 4404-018 Rev A or higher ONLY.
35.25”
20.5”
29.5”
38.5”
38”
DoorKing, Inc. reserves the right to make changes in the products described in this manual without notice and without obligation of DoorKing, Inc. to notify any persons
of any such revisions or changes. Additionally, DoorKing, Inc. makes no representations or warranties with respect to this manual. This manual is copyrighted, all rights
reserved. No portion of this manual may be copied, reproduced, translated, or reduced to any electronic medium without prior written consent from DoorKing, Inc.
Class of Operation
Model 6555 - UL325 Class III, IV
Type of Gate
Vehicular Swing Gates Only
Inherent Entrapment Protection Device
Inherent Reverse Sensor System (Type A)
External Entrapment Protection Device Inputs
Connection inputs for Non-contact Sensor - Photo Sensor (Type B1)
(Monitored Inputs)
Connection input for Contact Sensor - Reversing Edge (Type B2)
Entrapment Protection must be provided for the gate system where the risk of entrapment or obstruction exists.
The operator will not run without one or more monitored type B1 or B2 entrapment protection devices in EACH
entrapment area.
Volt / Phase
Motor
Power
Amps
230 / 1
2 HP
11.5
2000 lbs
25 ft
60
This vehicular gate operator is designed for Class III and Class IV applications
ONLY and must never be used in applications serving the general public.
Type of wiring to be used on ALL
external devices:
A)
Type
CL2
,
CL2P
,
CL2R
, or
CL2X
.
B)
Other cable with
equivalent
or
better
electrical, mechanical, and
flammability ratings.
Max Gate
Weight
Max Gate
Length
Cycles Per
Hour
Bi-Parting Gate Operators CANNOT be used.
