Revision: 1.0
Sapphire-RXD3 Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 3-4
3. Connections, Controls and Indicators
3.1 Introduction
This chapter will help identify all the connections and interfaces of the product needed to install,
control and monitor the device.
3.2 Front Panel
No.
Item
Notes
1
Power LED
The power LED will illuminate when power is on.
2
Power on/off switch
It is recommended to use the power switch to power the device
On or Off.
3
Touchscreen display
When fully booted (approx. 90s), the touchscreen display can be
used to monitor and configure some of the most used features.
See
Section 4
for a description of operation.
Note
: The web user interface can be used for more detailed
configuration of the Sapphire-RXD3.