![background image](http://html1.mh-extra.com/html/domo/sapphire-rxd3/sapphire-rxd3_setup-manual_2519922023.webp)
Revision: 1.0
Sapphire-RXD3 Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-18
5.5.3
Config Pages
The Config pages are used to make changes to configuration settings. Select the category you want to
edit from the list on the left panel.
Menus can be expanded or collapsed using the arrows adjacent to the header of each parameter.
Note
: It may be useful to open the
Help
(?) menu for descriptions of settings.
Changes to settings can be applied or saved. It is important to understand the differences:
Apply
– applies the setting to the running config, this does not save the setting. On reboot the unit
will return to the saved settings.
Save
– saves the settings in the running config, this will restore these settings on reboot. To save
a change, it must be applied first.
Note
: Categories marked with a save icon with a cross
, indicate that they have been applied but
not saved. To carry out a global save, go to the
Manage>Config
page.