![background image](http://html1.mh-extra.com/html/domo/sapphire-rxd3/sapphire-rxd3_setup-manual_2519922010.webp)
Revision: 1.0
Sapphire-RXD3 Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 3-5
3.3 Rear Panel
No.
Item
Notes
1
XLR 4-way jack
Connect the supplied PSU (CA4069) for 12V power. See
Section 3.4.1
IMPORTANT
: Please ensure the power switch on the front
panel is set to Off when connecting the power source. The
power switch should be used to control power to the device.
2
SFP+ cage
SFP provides a video output for monitoring.
Supports 12G-SDI, 6G-SDI or 3G-SDI video formats.
3
HD-BNC socket
SDI output 1.
Supports 12G-SDI, 6G-SDI or 3G-SDI video formats.
4
HD-BNC socket
SDI output 2.
Supports 12G-SDI, 6G-SDI or 3G-SDI video formats.
5
HD-BNC socket
SDI output 3.
Supports 3G-SDI video formats.
6
HD-BNC socket
SDI output 4.
Supports 3G-SDI video formats.
7/8
RJ45 jack
Gigabit Ethernet connection for web user interface control or
IP streaming.
Note
: The CTRL and STREAM labels are notional and are
used to differentiate the connections.
9
BNC socket (50
Ω
)
RF input from a downconverter/antenna assembly.
Up to eight antennas can be fitted for maximum receive
diversity depending on variant.
10
BNC socket (75
Ω
)
Connect a Genlock device to this port to keep the receiver
synchronised with all the other equipment in your facility.
11
BNC socket (75
Ω
)
ASI output.