![background image](http://html1.mh-extra.com/html/domo/sapphire-rxd3/sapphire-rxd3_setup-manual_2519922018.webp)
Revision: 1.0
Sapphire-RXD3 Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-13
5.3.3
IPv6 Address
DBS products support link-local IPv6 addressing. This will allow web browser control if the device is
not connected via a DHCP server, or the IP address does not match the subnet of the PC and the IP
address settings need to be changed.
The IPv6 address of the Sapphire-RXD can be discovered from the front panel touchscreen, see
Section 5.3.2
Alternatively, the IPv6 address can be discovered from a Windows Powershell command prompt by
entering the command:
Get-NetNeighbor -IPAddress FE80*
The IP address for the Sapphire-RXD3 must have a
Reachable
state.
Once the IPv6 address has been discovered, enter the IP address into your web browser using
square-brackets around the address:
e.g., https://[ fe80::761a:e0ff:fe8f:f1cd]
Note
: If this is the first time the web interface has been opened, follow the prompts explained in
Section 5.4