![background image](http://html1.mh-extra.com/html/domo/sapphire-rxd3/sapphire-rxd3_setup-manual_2519922027.webp)
Revision: 1.0
Sapphire-RXD3 Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 6-22
Go to the
Config>RX
page and configure the
Demodulator
settings to match the transmitter.
Downconverter
presets are available for standard downconverters. If a different manufacturer is
used, then manual settings can be applied.
Click
Apply
to activate a running config and
Save
to retain.
RF Input
can be verified on the front panel touchscreen, and on the WUI
Status
and
Home
page.
Note
: The Home page will only display used parameters. The
RF Input
will not be displayed if RX has
not been selected as a source for the ASI output, the IP streaming output or the Demux service.
Note
: The example below is for a receiver with only one RF input for illustration.