![background image](http://html1.mh-extra.com/html/domo/sapphire-rxd3/sapphire-rxd3_setup-manual_2519922026.webp)
Revision: 1.0
Sapphire-RXD3 Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 6-21
6. Basic Setup Guide
6.1 Introduction
The sections in this chapter can be used in conjunction as a workflow to complete a system
configuration.
Currently only limited RF setup can be achieved via the front panel touchscreen, therefore, only web
interface configuration is covered.
Only settings for the Sapphire-RXD3 are explained, it is assumed that the inputs to the system are
provided.
6.2 Receiver Setup
Sapphire-RXD3 can be configured as an RF receiver (RX) which can be used as a source for the ASI
output, the IP streaming output or the Demux service. Setting the Demux to RX will allow you to
decode from the receiver.