BI-FUEL DIESEL
Standby Power Rating
375KW 60 Hz
FEATURES
12.0DTA ENGINE
Turbocharged, Aftercooled
MB375
277/480, 345/600 Volt
Natural Gas With Diesel Pilot Ignition
■
REMOTELY PROGRAMMABLE VIA GENLINK communications
software which is provided with each system sold.
■
SOLID STATE DIGITAL VOLTAGE REGULATOR senses all 3
phases, electronically matches surge loads to the torque curve of
the engine.
■
ECONOMICAL POWER. Microprocessor controlled bi-fuel diesel/
natural gas engine provides long, low cost, reliable life.
■
SINGLE SOURCE SERVICE RESPONSE from Generac's dealer
network provides parts and service know-how for the entire unit,
from the engine to the smallest electronic component. You are never
on your own when you own a GENERAC POWER SYSTEM.
■
GENERAC TRANSFER SWITCHES, SWITCHGEAR AND
ACCESSORIES. Long life and reliability is synonymous with
GENERAC POWER SYSTEMS. One reason for this confidence
is that the GENERAC product line includes its own transfer
systems, accessories, switchgear and controls for total system
compatibility.
■
WEATHER PROTECTIVE SOUND ATTENUATED ENCLOSURE
is available utilizing Generac's advance sound technology.
■
INNOVATIVE DESIGN & PROTOTYPE TESTING are key
components of GENERAC'S success in "IMPROVING POWER BY
DESIGN." But it doesn't stop there. Total commitment to component
testing, reliability testing, environmental testing, destruction and life
testing, plus testing to applicable CSA, NEMA, EGSA, and other
standards, allows you to choose GENERAC POWER SYSTEMS
with the confidence that these systems will provide superior
performance.
■
PARALLELING SYSTEM FEATURES
✓
AUTO SYNCHRONIZATION
✓
ISOCHRONOUS LOAD SHARING
✓
REVERSE POWER PROTECTION
✓
MAXIMUM POWER PROTECTION
✓
ELECTRICALLY OPERATED MECHANICAL
HELD CONTACTORS
✓
UL2200 LISTED
■
POWERMANAGER
®
DIGITAL CONTROL PLATFORM. The
PowerManager
®
Digital Control Platform (PM-DCP) is a powerful
control system built around a 32 bit industrial microprocessor.
Standard factory programming controls the entire engine generator
system while allowing the PM-DCP, with its onboard PLC, to be
customized to meet any application requirement. The system is
available on single unit gas, diesel or bi-fuel installations as well
as Modular Paralleling Systems (MPS) from 200 kW - 3000 kW.
