manualshive.com logo in svg

Dolomite fluidic factory, User Manual

Share
Download
Dolomite fluidic factory User Manual Download Page 8

 
 

 

MAR-000276_v.1.3

 

Chapter:

 Safety 

 

Page 8 of 48

 

 

 
 

Always connect the Fluidic Factory to an earthed AC power outlet. 
The operating voltage is indicated on the specification sticker. Non 
observance of this provision may result in damage to the Fluidic 
Factory or in personal injury or damage to property. 

 

This product does NOT comply with the ATEX directive and must 
not be used in explosive atmospheres. 

 

Disassembling any part of the Fluidic Factory other than those 
described in this User Guide will invalidate the warranty. 

 

Cleaning 

Cleaning should only be performed by personnel trained in such   
work, and who are aware of the possible dangers involved.  The 
Fluidic Factory (and all the associated hardware) has not been 

 designed for sterilisation or use with an autoclave. 

 

Returning Equipment 

Equipment which has been contaminated with, or exposed to, body fluids, 
toxic chemicals or any other substance hazardous to health 

must be 

decontaminated before it is returned to Dolomite Microfluidics or its 
distributor.  An RMA number must also be obtained Please contact 

[email protected]

 

Environmental Conditions 

For indoor use only 

Temperature range: +5°C to +40°C 

Humidity: Maximum relative humidity of 80% 

 

 

 

Summary of Contents for fluidic factory

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands