MAR-000276_v.1.3
Chapter:
Creating New Print Files
Page 34 of 48
Refit the Print Nozzle, Filament Guide and Gearbox as
described in section 4.1.3 and 4.1.4. See Figure 61.
6
Creating New Print Files
Print files are open format files and may be downloaded from the Design
Library. Designs can also be created by CAD software and then saved as a
.stl file, which carries information about the surfaces of the model. The
Fluidic Factory PC software accepts .stl files and outputs print files (.phff).
This software is supplied with the Fluidic Factory. Alternatively, a copy can
be obtained from
6.1
Installing the PC Software
Copy the installation file onto the computer desktop and
click on the Set up Wizard. See Figure 62.
Select an installation folder See Figure 63.
Figure 62
Figure 63
Figure 61
