MAR-000276_v.1.3
Chapter:
Quick Start Guide
Page 19 of 48
Ensure that the Print Head is fully engaged once the
Release and Fitting Catch has been released. See
Figure 11.
4.1.2 Fitting the Heated Print Bed and Insert
Fit the Print Bed Insert into the Print Bed with the handle
on the right facing away from the electrical contacts.
The Bed Insert is held in place by magnetic force. See
Figure 12.
Slide the Bed Insert so that it is justified to the bottom
right hand corner. See Figure 13.
Push the Print Bed into position so that the spring loaded pins
align with the contacts and the Print Bed sits flat on the Fluidic
Factory. See Figure 14 which is correct and Figure 15 which is
incorrect.
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
