MAR-000276_v.1.3
Chapter:
Quick Start Guide
Page 20 of 48
4.1.3 Fitting the Filament Coil, Holder Guide and Nozzle
Slide the Filament Coil in its holder onto the rear of the Fluidic
Factory. See Figures 16 and 17.
Ensure that the Filament Guide is pushed into the
recess on the Filament Reel Holder. See Figure 18.
Figure 8
Figure 18
Figure 16
Figure 17
CAUTION: The filament is slightly brittle, please handle any of the components that are in contact with the
filament with care, to avoid breakage. If the filament does break, follow the instructions in section 5.8
