MAR-000276_v.1.3
Chapter:
Quick Start Guide
Page 22 of 48
4.2
Attaching the Gearbox
Align the Gearbox with the Print Head. See Figure 23.
Support the Gearbox from underneath and push up.
See Figure 24.
Push back the Filament Tensioning Arm, rotate the
Gearbox clockwise pushing firmly on the bottom left
corner of the Gearbox to lock it into place. Release the
arm. See Figures 25 and 26.
4.2.1 Powering up the Fluidic Factory
Power up the Fluidic Factory with the Power Switch at
the rear of the unit. See Figure 27.
Figure 26
Figure 24
Figure 25
Figure 23
Figure 27
