MAR-000276_v.1.3
Chapter:
Quick Start Guide
Page 21 of 48
The Print Nozzle is supplied attached to the Filament
Guide. Pull back the Filament Tensioner Arm and
push the Print Nozzle as far as it will go into the recess
but without forcing it. Release the arm.
See Figure 19 and 20.
With the Print Nozzle correctly in-situ, it will look as
shown. See Figure 21.
Ensure that the Filament Guide is secured in the Print Head
between the two spring loaded balls. See Figure 22.
Figure 20
Figure 21
Figure 22
Figure 19
