Dodge Challenger SRT 392 2015, Operating Information Manual

Page: 129 / 658

•
As soon as the driver exits the Lap Timer
pages the “current” timer will stop and the
time will be reset to 0:00.00
•
If the driver stays on the Lap Timer pages the
“current” timer will reset to 0:00.0 when igni-
tion is placed in the off position, or ignition
placed in the ON position (or will roll over at
59:59.99 if ever possible).
•
Each time the driver pushes OK for a Lap
that current time populates the Last time and
also populates the 1st (top) space on the
Timer History page the current time resets to
0:00.0 at every push of the OK button.
•
The timer will stop when the driver navigates
away from this page.
Lap History
When selected, this screen displays the Lap
History, and will color highlight the time that is
the best time from the Timer Page.
•
Each time the driver presses the OK button
(while on the Lap Timer page) the current
Lap Time populates the 1st spot and the rest
of the data shifts down.
•
Color will indicate the time that is the best
time from the Timer Page.
•
Holding the OK button only resets the page
you are on.
•
Lap History page is a static display of lap
times only.
Top Speed
When selected, this screen displays the Top
Speed since last reset:
•
Populates a top speed from first drive cycle
and every time that speed is exceeded that
number is stored here unless/until the driver
resets the screen.
•
Latching over ignition cycles.
•
Units will change with the global change in
units.
Driver Assist
Adaptive Cruise Control (ACC) Menu
The DID displays the current ACC system set-
tings. The information displayed depends on
ACC system status.
Push the ADAPTIVE CRUISE CONTROL
(ACC) ON/OFF button (located on the steering
wheel) until one of the following displays in the
DID:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
“Adaptive Cruise Control Off.”
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read “Adaptive Cruise Control Ready.”
Push the SET + or the SET- button (located on
the steering wheel) and the following will display
in the DID:
ACC SET
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
•
Distance Setting Change
•
System Cancel
126