Dodge Challenger SRT 392 2015, Operating Information Manual

Page: 67 / 658

“Slide-On-Rod” And Extender
Features Of Sun Visor
To use the “Slide-On-Rod” feature of the sun
visor, rotate the sun visor downward and swing
the sun visor so it is parallel to the side window,
grabbing the sun visor with your left hand pull
rearwards until the sun visor is in the desired
position. To use the extender feature of the sun
visor, grab the extender which is located at the
rear of the visor and pull rearward.
BLIND SPOT MONITORING
(BSM) — IF EQUIPPED
The Blind Spot Monitoring (BSM) system uses
two radar-based sensors, located inside the
rear bumper fascia, to detect highway licens-
able vehicles (automobiles, trucks, motor-
cycles, etc.) that enter the blind spot zones from
the rear/front/side of the vehicle.
When the vehicle is started, the BSM warning
light will momentarily illuminate in both outside
rear view mirrors to let the driver know that the
system is operational.
Automatic Transmission Vehicles
The BSM system sensors operate when the
vehicle is in any forward gear or REVERSE and
enters stand-by mode when the vehicle is in
PARK.
Illuminated Vanity Mirror Slide-On-Rod Extender Rear Detection Zones
64