Dodge Challenger SRT 392 2015, Operating Information Manual

Page: 23 / 658

Power Door Locks
The power door lock switch is located on each
door trim panel. Use this switch to lock or unlock
the doors.
The doors can also be locked and unlocked with
the Keyless Enter-N-Go™ (Passive Entry) sys-
tem. For further information, refer to “Keyless
Enter-N-Go™” in “Things To Know Before Start-
ing Your Vehicle”.
If you push the power door lock switch while the
ignition is on, and either door is open, the power
locks will not operate. This prevents you from
accidentally locking the Key Fob in the vehicle.
Turning off the ignition or closing the door will
allow the locks to operate. If a door is open, the
ignition is either cycled to ACC or RUN (engine
not running), a chime will sound as a reminder.
Automatic Door Locks — If Equipped
The auto door lock feature default condition is
enabled. When enabled, the door locks will lock
automatically when the vehicle’s speed ex-
ceeds 15 mph (24 km/h). The auto door lock
feature can be enabled or disabled by your
authorized dealer or through the Uconnect®
Settings in your radio.
Automatic Unlock Doors On Exit
The doors will unlock automatically if:
1. The Automatic Unlock Doors On Exit feature
is enabled.
2. The transmission was in gear and the ve-
hicle speed returned to 0 mph (0 km/h).
3. The transmission is in PARK.
4. The driver door is opened.
5. The doors were not previously unlocked.
6. The vehicle speed is 0 mph (0 km/h).
Automatic Unlock Doors On Exit
Programming
The Automatic Unlock Doors On Exit feature
can
be enabled or disabled. Refer to
“Uconnect® Settings” in “Understanding Your
Instrument Panel” for further information.
NOTE:
Use the Automatic Unlock Doors On Exit
feature in accordance with local laws.
KEYLESS ENTER-N-GO™
The Passive Entry system is an enhancement
to the vehicle’s Remote Keyless Entry (RKE)
system and a feature of Keyless Enter-N-Go™.
This feature allows you to lock and unlock the
vehicle’s door(s) without having to push the
RKE transmitter lock or unlock buttons.
NOTE:
•
Passive Entry may be programmed ON/
OFF; refer to “Uconnect® Settings” in
“Understanding Your Instrument Panel”
for further information.
•
If wearing gloves on your hands, or if it
has been raining on the Passive Entry
Power Door Lock Switch
20