Dodge 2012 Journey Owner'S Manual Download Page 82

Page: 82 / 601

3. Lift the seat cushion up and push back to lock it in the
booster seat position.

4. Place the child upright in the seat with their back
firmly against the seatback.

5. Grasp the latch plate and pull out the seat belt.

6. Slide the latch plate up the webbing as far as necessary
to allow the seat belt to go around the child’s lap.

NOTE:

The lap portion of the seat belt should be low on

the hips and as snug as possible.

7. Once the seat belt is long enough to fit properly, insert
the latch plate into the buckle until you hear a “click.”

Booster Seat

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands

Dodge 2012 Journey, Owner'S Manual

Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands