Dodge 2012 Journey Owner'S Manual Download Page 120

Page: 120 / 601

•

Transfer the call to/from the phone

•

Swap 2 active calls

•

Join 2 active calls together

Touch-Tone Number Entry

•

Touch the “Phone” soft-key,

•

Touch the “Dial” soft-key,

•

The Touch-Tone screen will be displayed,

•

Use the numbered soft-keys to enter the number and
touch “Call”.

To send a touch tone using Voice Recognition (VR), press
the

button while in a call and say “1234#” or you

can say “Send Voicemail Password” if Voicemail pass-
word is stored in your mobile phonebook.

Recent Calls

You may browse up to 34 of the most recent of each of the
following call types:

•

Incoming Calls

•

Outgoing Calls

•

Missed Calls

•

All Calls

These can be accessed by touching the recent calls
soft-key on the Phone main screen.

You can also press the

button and say “Show my

incoming calls” from any screen and the Incoming calls
will be displayed.

NOTE:

Incoming can also be replaced with “Outgoing”,

“Recent” or “Missed”.

118

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands

Dodge 2012 Journey, Owner'S Manual

Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands