Dodge 2012 Journey Owner'S Manual Download Page 462 | Manualshive

Page: 462 / 601

background image

NOTE:

Remember that everything put into or on the

trailer adds to the load on your vehicle. Also, additional
factory-installed options or authorized dealer-installed
options must be considered as part of the total load on
your vehicle. Refer to the “Tire and Loading Information”
placard for the maximum combined weight of occupants
and cargo for your vehicle.

Towing Requirements

To promote proper break-in of your new vehicle drive-
train components the following guidelines are recom-
mended:

CAUTION!

•

Do not tow a trailer at all during the first 500 miles
(805 km) the new vehicle is driven. The engine,
axle or other parts could be damaged.

(Continued)

CAUTION! (Continued)

•

Then, during the first 500 miles (805 km) that a
trailer is towed, do not drive over 50 mph
(80 km/h) and do not make starts at full throttle.
This helps the engine and other parts of the
vehicle wear in at the heavier loads.

Perform the maintenance listed in the “Maintenance
Schedule.” Refer to “Maintenance Schedule” for further
information. When towing a trailer, never exceed the
GAWR, or GCWR, ratings.

WARNING!

Improper towing can lead to a collision. Follow these
guidelines to make your trailer towing as safe as
possible:

(Continued)

460

STARTING AND OPERATING

«
...
460
461
462
463
464
...
»

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Journey

Brand: KC HiLiTES Pages: 4

Brand: Acdeos Pages: 7

Brand: Warrior Products Pages: 2

Brand: Chevrolet Pages: 494

Brand: BGS technic Pages: 5

Brand: Oldsmobile Pages: 344

Brand: ABL Pages: 66

Brand: Ford Pages: 38

Brand: Thule Pages: 2

STO N SHO SNS 144

Brand: Big Mikes Performance Parts Pages: 7

Brand: Lincoln Pages: 10

Brand: Mont Blanc Pages: 2

FlashLogic FLC-FORS-FO1B-FLRSFO1-EN

Brand: ADS Pages: 25

Brand: Enduro Pages: 52

Ridesmart KMA-610

Brand: KlipXtreme Pages: 12

Brand: Porsche Pages: 127

Brand: Pyle Pages: 14

Brand: Gator Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands