manualshive.com logo in svg

Dodge 2012 Journey, Owner'S Manual

The Dodge 2012 Journey Owner's Manual is an essential guide to understand and maintain your vehicle. Get all the information you need in one comprehensive manual, available for free download at manualshive.com. Discover the ins and outs of your Dodge Journey with this detailed manual, ensuring a smooth and informed ownership experience.

Share
Download
background image

Multifunction Lever

The multifunction lever controls the operation of the turn
signals, headlight beam selection and passing lights. The
multifunction lever is located on the left side of the
steering column.

Turn Signals

Move the multifunction lever up or down and the arrows
on each side of the instrument cluster flash to show
proper operation of the front and rear turn signal lights.

NOTE:

•

If either light remains on and does not flash, or there is
a very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the indicator bulb is
defective.

•

A “Turn Signal On” message will appear in the EVIC
(if equipped) and a continuous chime will sound if the
vehicle is driven more than 1 mile (1.6 km) with either
turn signal on.

Multifunction Lever

208

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Journey

UnderCover 2110 Installation Manual preview
2110
Brand: UnderCover Pages: 16
Back View RV-250 User Manual preview
RV-250
Brand: Back View Pages: 168
Daihatsu S85 Wiring Diagrams preview
S85
Brand: Daihatsu Pages: 41
Daihatsu S85 Workshop Manual preview
S85
Brand: Daihatsu Pages: 268
RaceChip Pro 2 Installation Manual preview
Pro 2
Brand: RaceChip Pages: 12
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
Saleen 10-8002-C11998B Installation Manual preview
10-8002-C11998B
Brand: Saleen Pages: 12
Buick 2013 Buick Verano Manual preview
2013 Buick Verano
Brand: Buick Pages: 5
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
APS IA06SJD4B Installation Instructions preview
IA06SJD4B
Brand: APS Pages: 3
Prorack K577W Fitting Instructions Manual preview
K577W
Brand: Prorack Pages: 15
Jeep Grand Cherokee SRT 2019 Owner'S Manual preview
Grand Cherokee SRT 2019
Brand: Jeep Pages: 656
Brink 4698 Fitting Instructions Manual preview
4698
Brand: Brink Pages: 26
OMNISTOR Omni-Bike Sport Ducato Installation preview
Omni-Bike Sport Ducato
Brand: OMNISTOR Pages: 5
Reimo TOUR EASY 4 936550 Quick Start Manual preview
TOUR EASY 4 936550
Brand: Reimo Pages: 4
Ford TRANSIT 2015 Quick Reference Manual preview
TRANSIT 2015
Brand: Ford Pages: 8

Brands by name

Popular brands

Load more brands