Dodge 2012 Journey Owner'S Manual Download Page 139

Page: 139 / 601

NOTE:

For phones which are not made a favorite, the

phone priority is determined by the order in which it was
paired. The latest phone paired will have the higher
priority.

You can also use the following VR commands to bring up
the Paired Phone screen from any screen on the radio:

•

“Show Paired Phones” or

•

“Connect My Phone”

Pair A Bluetooth

威

Streaming Audio Device

•

Touch the “Player” soft-key to begin,

•

Change the Source to Bluetooth

威

•

Touch the “Bluetooth

威

” soft-key,

•

Touch the “Add Device” soft-key,

NOTE:

If there is no device currently connected with the

system, a pop-up will appear.

•

Search for available devices on your Bluetooth

威

en-

abled audio device. When prompted on the device,
enter the name and PIN shown on the Uconnect
Touch™ screen,

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

137

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands

Dodge 2012 Journey, Owner'S Manual

Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands