Dodge 2012 Journey Owner'S Manual Download Page 201 | Manualshive

Page: 201 / 601

background image

WARNING!

Do not drive the vehicle with the seat in this posi-
tion, as it is only intended for entering and exiting
the third row seats. Failure to follow this warning
may result in personal injury.

To Unfold And Move The Second-Row Passenger Seat
Rearward

1. Move the seatback rearward until it locks in place and
then continue sliding the seat rearward on its tracks until
it locks in place.

2. Push the seat cushion downward to lock it in place.

3. Adjust the seat track position as desired. Using body
pressure, move forward and rearward on the seat to be
sure that the seat adjusters have latched.

WARNING!

Be certain that the seatback and seat are locked
securely into position. Otherwise, the seat will not
provide the proper stability for child seats and/or
passengers. An improperly latched seat could cause
serious injury.

50/50 Split Third-Row Passenger Seats With
Fold-Flat Feature — Seven Passenger Models

To provide additional storage area, each third-row pas-
senger seatback can be folded flat. This allows for ex-
tended cargo space and still maintains some rear seating
room if needed.

NOTE:

Prior to folding the third-row passenger seat-

back, make sure the second-row passenger seatback is
not in a reclined position. This will allow the seatback to
fold easily.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

199

«
...
199
200
201
202
203
...
»

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Journey

Brand: KC HiLiTES Pages: 4

Brand: Lancia Pages: 386

Brand: Vauxhall Pages: 177

Brand: Car-Interface Pages: 23

Brand: RuggON Pages: 2

Brand: BGS technic Pages: 5

Brand: Oldsmobile Pages: 344

Brand: ABL Pages: 66

Vantage 12 Series

Brand: Ecco Pages: 5

Brand: AC Schnitzer Pages: 16

Carpower CAP-20

Brand: Monacor Pages: 2

2012 Truck Chassis cab

Brand: RAM Pages: 506

Brand: ideus Pages: 159

PRIME DESIGN HXR-269-E-UM3-80

Brand: Safe Fleet Pages: 12

Brand: Rugged Ridge Pages: 2

Brand: SAFARI Pages: 5

Brand: Toyota Pages: 779

Brand: Phonocar Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands