Dodge 2012 Journey Owner'S Manual Download Page 242 | Manualshive

Page: 242 / 601

background image

WARNING!

•

Your motorized door or gate will open and close
while you are programming the universal trans-
ceiver. Do not program the transceiver if people,
pets or other objects are in the path of the door or
gate. Only use this transceiver with a garage door
opener that has a “stop and reverse” feature as
required by Federal safety standards. This includes
most garage door opener models manufactured
after 1982. Do not use a garage door opener without
these safety features. Call toll-free 1–800–355–3515
or, on the Internet at www.HomeLink.com for
safety information or assistance.

•

Vehicle exhaust contains carbon monoxide, a dan-
gerous gas. Do not run your vehicle in the garage
while programming the transceiver. Exhaust gas
can cause serious injury or death.

General Information

This device complies with FCC rules Part 15 and Industry
Canada RSS-210. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference that may be
received including interference that may cause undesired
operation.

NOTE:

•

The transmitter has been tested and it complies with
FCC and IC rules. Changes or modifications not
expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the
device.

•

The term IC before the certification/registration num-
ber only signifies that Industry Canada technical
specifications were met.

240

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
240
241
242
243
244
...
»

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Journey

Brand: Metra Electronics Pages: 14

Brand: Camoplast Pages: 60

VIEWLINE 52 MM - MOUNTING 11-09

Brand: VDO Pages: 4

Brand: Van Guard Pages: 3

Brand: Camecho Pages: 2

E60-82-007-02-10

Brand: Eibach Pages: 3

Brand: ULTIMATE SPEED Pages: 40

2011 SRX CROSSOVER

Brand: Cadillac Pages: 416

Brand: TIE DOWN Pages: 2

Brand: Thule Pages: 8

Brand: Edelbrock Pages: 1

2005-2009 Chrysler 300C

Brand: Mopar Pages: 7

Brand: Brodit Pages: 2

Brand: Saturn Pages: 432

transit connect 2012

Brand: Ford Pages: 299

Brand: MayPole Pages: 3

Brand: 70mai Pages: 47

Brand: Champion Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands