Dodge 2012 Journey Owner'S Manual Download Page 531 | Manualshive

Page: 531 / 601

background image

Power Transfer Unit (PTU) – AWD Models Only

Lubricant Selection

Use only the manufacturer’s recommended fluid. Refer
to “Fluids, Lubricants, and Genuine Parts” in “Maintain-
ing Your Vehicle” for further information.

Fluid Level Check

Visually inspect the unit at each oil change for leakage. If
leakage is detected, Check the fluid level by removing the
fill plug. The fluid level should be maintained between
the bottom of the fill hole to 1/8 in (4 mm) below the fill
hole.

Add fluid, if necessary, to maintain the proper level.

Frequency Of Fluid Change

Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

Appearance Care And Protection From Corrosion

Protection Of Body And Paint From Corrosion

Vehicle body care requirements vary according to geo-
graphic locations and usage. Chemicals that make roads
passable in snow and ice and those that are sprayed on
trees and road surfaces during other seasons are highly
corrosive to the metal in your vehicle. Outside parking,
which exposes your vehicle to airborne contaminants,
road surfaces on which the vehicle is operated, extreme
hot or cold weather and other extreme conditions will
have an adverse effect on paint, metal trim, and under-
body protection.

The following maintenance recommendations will enable
you to obtain maximum benefit from the corrosion
resistance built into your vehicle.

7

MAINTAINING YOUR VEHICLE

529

«
...
529
530
531
532
533
...
»

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Journey

Brand: Saab Pages: 75

Brand: Samsung Pages: 133

Brand: Pacbrake Pages: 9

Brand: Chevrolet Pages: 356

Brand: Ford Pages: 272

Brand: Pontiac Pages: 376

Brand: Jeep Pages: 712

Brand: Pacbrake Pages: 14

Brand: EUFAB Pages: 12

Brand: Chevrolet Pages: 2

Brand: Fiat Pages: 172

Brand: Honda Pages: 6

Brand: U & Me Brothers Pages: 6

Xplore Pro II SxS

Brand: Marlon Pages: 15

Brand: Mazda Pages: 122

Brand: Ford Pages: 4378

Brand: Toyota Pages: 549

Brand: Westin Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands