Dodge 2012 Journey Owner'S Manual Download Page 345

Page: 345 / 601

intended for home or other limited viewing uses other-
wise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.

Dolby

威

Digital and MLP Lossless Manufactured

under license from Dolby Laboratories.

⬙

Dolby

⬙

MLP Lossless

⬙

, and the double-D symbol are trademarks

of Dolby Laboratories. Confidential unpublished works.
Copyright 1992-1997 Dolby Laboratories. All right re-
served.

General Information

This system complies with Part 15 of the FCC Operation
is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,
including interference that may cause undesired
operation.

iPod

姞

/USB/MP3 CONTROL — IF EQUIPPED

This feature allows an iPod

威

or external USB device to be

plugged into the USB port.

iPod

威

control supports Mini, 4G, Photo, Nano, 5G iPod

威

and iPhone

威

devices. Some iPod

威

software versions may

not fully support the iPod

威

control features. Please visit

Apple’s website for software updates.

For further information, refer to the Uconnect Touch™
User’s Manual.

UNDERSTANDING YOUR INSTRUMENT PANEL

343

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands

Dodge 2012 Journey, Owner'S Manual

Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands