Dodge 2012 Journey Owner'S Manual Download Page 467 | Manualshive

Page: 467 / 601

background image

Towing Tips

Before setting out on a trip, practice turning, stopping,
and backing up the trailer in an area located away from
heavy traffic.

Automatic Transmission

The DRIVE range can be selected when towing. How-
ever, if frequent shifting occurs while in this range, use
the Autostick

威

feature to select a lower gear.

NOTE:

Using a lower gear range while operating the

vehicle under heavy operating conditions will improve
performance and extend transmission life by reducing
excessive shifting and heat build up. This action will also
provide better engine braking.

If you REGULARLY tow a trailer for more than 45 min-
utes of continuous operation, then change the transmis-
sion fluid and automatic transmission filter according to

the interval specified for “police, taxi, fleet, or frequent
trailer towing.” Refer to the “Maintenance Schedule” for
the proper maintenance intervals.

Electronic Speed Control – If Equipped

− Do not use in hilly terrain or with heavy loads.

− When using the speed control, if you experience speed

drops greater than 10 mph (16 km/h), disengage until
you can get back to cruising speed.

− Use speed control in flat terrain and with light loads to

maximize fuel efficiency.

AutoStick

威

– If Equipped

− By using the AutoStick

威

modes and selecting a specific

gear range, frequent shifting can be avoided. The
highest gear range should be selected that allows for

5

STARTING AND OPERATING

465

«
...
465
466
467
468
469
...
»

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Journey

Brand: UnderCover Pages: 16

Brand: Camoplast Pages: 60

Green Motion Building

Brand: Eaton Pages: 12

Brand: Jeep Pages: 1528

Brand: Draw tite Pages: 4

Brand: EFILive Pages: 25

Brand: PUTCO Pages: 2

Fleetwood Brougham Sedan 1966

Brand: Cadillac Pages: 56

Brand: BMW Pages: 64

Brand: Cadillac Pages: 48

Brand: MacNeil Pages: 2

Auto-Dimming Mirror

Brand: Mazda Pages: 2

Brand: PEUGEOT Pages: 404

Brand: KAP Pages: 22

2002 Accord Coupe

Brand: Honda Pages: 367

QuadraTop Adventure Top S

Brand: Quadratec Pages: 13

Automobille 2004 Century

Brand: Buick Pages: 12

Brand: Menabo Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands