Dodge 2012 Journey Owner'S Manual Download Page 332

Page: 332 / 601

two retaining clips first, and then rotate the remote back
up into the other two retaining clips until it snaps back
into position.

Locking The Remote Control

All remote control functionality can be disabled as a
parental control feature.

1. Touch the “MORE” soft-key.

2. Touch the “Rear Entertainment” soft-key to display
the Rear Entertainment Controls.

3. Touch the “Lock-out” soft-key to lock the remote
control. Pressing the “Lock-out” soft-key a second time
will unlock the remote control.

NOTE:

Remote control lock-out will only apply to the

current ignition cycle. The VES™ will automatically
remove the lock-out if the ignition is cycled to “OFF”.

Replacing The Remote Control Batteries

The remote control requires two AAA batteries for op-
eration. To replace the batteries:

•

Locate the battery compartment on the back of the
remote, then slide the battery cover downward.

The Remote Control Storage

330

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2012 Journey


























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands

Dodge 2012 Journey, Owner'S Manual

Search results

Summary of Contents for 2012 Journey

Reviews:

Related manuals for 2012 Journey

Brands by name

Popular brands