Dodge 2012 Charger Owner'S Manual Download Page 484

Page: 484 / 594

Follow these steps to use the Manual Park Release:

NOTE:

To prevent the vehicle from rolling unintention-

ally, firmly apply the parking brake.

1. Remove the console storage bin to access the Manual
Park Release lever.

2. Using a small screwdriver or similar tool, fish the
tether strap up through the opening in the console base.

3. Insert the screwdriver into the slot in the center of the
lever, and disengage the spring steel lever locking tab by
pushing it to the right.

Console Storage Bin

Locking Tab

482

WHAT TO DO IN EMERGENCIES

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands

Dodge 2012 Charger, Owner'S Manual

Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands