Dodge 2012 Charger Owner'S Manual Download Page 33

Page: 33 / 594

Automatic Unlock Doors On Exit Programming

To change the current setting, refer to “Uconnect Touch™
Settings” in “Understanding Your Instrument Panel” for
further information.

NOTE:

Use the Automatic Unlock Doors On Exit feature

in accordance with local laws.

Child-Protection Door Lock System — Rear
Doors

To provide a safer environment for small children riding
in the rear seats, the rear doors are equipped with
Child-Protection Door Lock system.

To Engage Or Disengage The Child-Protection
Door Lock System

1. Open the rear door.

2. Insert the tip of the emergency key into the lock and
rotate to the LOCK or UNLOCK position.

3. Repeat steps 1 and 2 for the opposite rear door.

Child-Protection Door Lock Location

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands

Dodge 2012 Charger, Owner'S Manual

Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands