Dodge 2012 Charger Owner'S Manual Download Page 447

Page: 447 / 594

NOTE:

Only the correct size nozzle opens the latches

allowing the flapper door to open.

5. Fill the vehicle with fuel – when the fuel nozzle
“clicks” or shuts off the fuel tank is full.

6. Remove the fuel nozzle and close the fuel door.

NOTE:

A funnel is provided (located in the trunk in the

spare tire area) to open the flapper door to allow for
emergency refueling with a gas can.

CAUTION!

To avoid fuel spillage and overfilling, do not “top
off” the fuel tank after filling.

Fuel Funnel

STARTING AND OPERATING

445

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands

Dodge 2012 Charger, Owner'S Manual

Search results

Summary of Contents for 2012 Charger

Reviews:

Related manuals for 2012 Charger

Brands by name

Popular brands