Home
/
Dodge
/
2012 Charger
/
Owner'S Manual

Dodge 2012 Charger, Owner'S Manual, Page: 301 / 594

Share

Page: 301 / 594

Dodge 2012 Charger Owner'S Manual Download Page 301

CAUTION!

Driving with a hot engine cooling system could
damage your vehicle. If the temperature gauge reads
“H” pull over and stop the vehicle. Idle the vehicle
with the air conditioner turned off until the pointer
drops back into the normal range. If the pointer
remains on the “H” and you hear continuous chimes,
turn the engine off immediately and call an autho-
rized dealership for service.

WARNING!

A hot engine cooling system is dangerous. You or
others could be badly burned by steam or boiling
coolant. You may want to call an authorized dealer-
ship for service if your vehicle overheats. If you
decide to look under the hood yourself, see “Main-
taining Your Vehicle”. Follow the warnings under the
Cooling System Pressure Cap paragraph.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

299

«
...
299
300
301
302
303
...
»

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Reviews:

No comments