Home
/
Dodge
/
2012 Charger
/
Owner'S Manual

Dodge 2012 Charger, Owner'S Manual, Page: 472 / 594

Share

Page: 472 / 594

Dodge 2012 Charger Owner'S Manual Download Page 472

CAUTION!

Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the Jacking
Instructions for this vehicle.

1. Remove the spare tire, jack, and lug wrench.

2. If equipped with aluminum wheels where the center
cap covers the lug nuts, use the lug wrench to pry the
center cap off carefully before raising the vehicle.

3. Before raising the vehicle, use the lug wrench to
loosen, but not remove, the lug nuts on the wheel with
the flat tire. Turn the lug nuts counterclockwise one turn
while the wheel is still on the ground.

4. Place the jack underneath the lift area that is closest to
the flat tire. Turn the jack screw clockwise to firmly
engage the jack saddle with the lift area of the sill flange.

Jacking Locations

470

WHAT TO DO IN EMERGENCIES

«
...
470
471
472
473
474
...
»

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Reviews:

No comments