manualshive.com logo in svg

Dodge 2012 Charger, Owner'S Manual

The Dodge 2012 Charger Owner's Manual is a comprehensive guide packed with essential information to help you get the most out of your vehicle. Download the manual for free from manualshive.com and ensure you have all the necessary instructions and tips to maintain and operate your Dodge Charger efficiently.

Share
Download
background image

WARNING!

•

A loose tire or jack thrown forward in a collision
or hard stop could endanger the occupants of the
vehicle. Always stow the jack parts and the spare
tire in the places provided.

•

Have the deflated (flat) tire repaired or replaced
immediately.

Preparations For Jacking

1. Park the vehicle on a firm, level surface as far from the
edge of the roadway as possible. Avoid icy or slippery
areas.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic, pull far enough off
the road to avoid being hit when operating the jack
or changing the wheel.

2. Turn on the Hazard Warning flasher.

3. Set the parking brake.

4. Place the shift lever into PARK.

5. Turn OFF the ignition.

6.

Block the front and rear of the

wheel diagonally opposite of the jack-
ing position. For example, if changing
the right front tire, block the left rear
wheel.

468

WHAT TO DO IN EMERGENCIES

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Charger

Mazda 2011 Tribute Brochure & Specs preview
2011 Tribute
Brand: Mazda Pages: 4
Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
GARO ENTITY PRO Installation preview
ENTITY PRO
Brand: GARO Pages: 2
Ford FOCUS RS 2018 Owner'S Manual Supplement preview
FOCUS RS 2018
Brand: Ford Pages: 52
kincrome K12071 Owner'S Assemble And Operating Manual preview
K12071
Brand: kincrome Pages: 6
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
Honda 08A28-0J6-800 Installation Instructions Manual preview
08A28-0J6-800
Brand: Honda Pages: 32
PAC GM1A-R Quick Start Manual preview
GM1A-R
Brand: PAC Pages: 4
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
Bestop 614.04 Installation Manual preview
614.04
Brand: Bestop Pages: 31
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
LedGlow Advanced Million Color Installation Instructions preview
Advanced Million Color
Brand: LedGlow Pages: 4
Honda 1993 Civic Coupe Owner'S Manual preview
1993 Civic Coupe
Brand: Honda Pages: 201

Brands by name

Popular brands

Load more brands