Dodge 2012 Charger Owner'S Manual Download Page 157

Page: 157 / 594

•

Performance, such as audio clarity, echo, and loudness
to a large degree rely on the phone and network, and
not the Uconnect™ Phone.

•

Echo at the far end can sometimes be reduced by
lowering the in-vehicle audio volume.

•

In a convertible vehicle, system performance may be
compromised with the convertible top down.

SMS

Uconnect™ Phone can read or send new messages on
your phone.

Your phone must support SMS over Bluetooth

威

in order

to use this feature. If the Uconnect™ Phone determines
your phone is not compatible with SMS messaging over
Bluetooth

威

the “Messaging” button will be greyed out

and the feature will not be available for use.

NOTE:

Uconnect™ Phone SMS is only available when

the vehicle is not in moving.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

155

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Charger

Reviews:

Dodge 2012 Charger, Owner'S Manual, Page: 157 / 594

Search results

Summary of Contents for 2012 Charger

Reviews: