manualshive.com logo in svg

Dodge 2012 Charger, Owner'S Manual

The Dodge 2012 Charger Owner's Manual is a comprehensive guide packed with essential information to help you get the most out of your vehicle. Download the manual for free from manualshive.com and ensure you have all the necessary instructions and tips to maintain and operate your Dodge Charger efficiently.

Share
Download
background image

PARKSENSE

姞

REAR PARK ASSIST — IF

EQUIPPED

The ParkSense

威

Rear Park Assist system provides visual

and audible indications of the distance between the rear
fascia and a detected obstacle when backing up, e.g.
during a parking maneuver. Refer to “ParkSense

威

System

Usage Precautions” for limitations of this system and
recommendations.

ParkSense

威

will retain the last system state (enabled or

disabled) from the last ignition cycle when the ignition is
changed to the ON/RUN position.

ParkSense

威

can be active only when the shift lever is in

REVERSE. If ParkSense

威

is enabled at this shift lever

position, the system will remain active until the vehicle
speed is increased to approximately 7 mph (11 km/h) or
above. The system will become active again if the vehicle
speed is decreased to speeds less than approximately
6 mph (9 km/h).

ParkSense

姞

Sensors

The four ParkSense

威

sensors, located in the rear fascia/

bumper, monitor the area behind the vehicle that is
within the sensors’ field of view. The sensors can detect
obstacles from approximately 12 in (30 cm) up to 79 in
(200 cm) from the rear fascia/bumper in the horizontal
direction, depending on the location, type and orienta-
tion of the obstacle.

ParkSense

姞

Warning Display

The ParkSense

威

Warning screen will only be displayed if

Sound and Display is selected from the Uconnect
Touch™ System. Refer to “Uconnect Touch™ Settings” in
“Understanding Your Instrument Panel” for further in-
formation.

The ParkSense

威

Warning screen is located within the Elec-

tronic Vehicle Information Center (EVIC). It provides visual
warnings to indicate the distance between the rear fascia/
bumper and the detected obstacle. Refer to “Electronic

246

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Charger

N-Com B3 User Instructions And Safety preview
B3
Brand: N-Com Pages: 28
iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
Jeep 2014 Wrangler Owner'S Manual preview
2014 Wrangler
Brand: Jeep Pages: 673
Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
Audiovox UniStreamONE Installation Manual preview
UniStreamONE
Brand: Audiovox Pages: 24
Mercedes-Benz GLE Coupe Brief Overview preview
GLE Coupe
Brand: Mercedes-Benz Pages: 2
Westin 25-0560 Instructions preview
25-0560
Brand: Westin Pages: 2
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
Menabo DELTA DL FIX 209FP Fitting Instructions Manual preview
DELTA DL FIX 209FP
Brand: Menabo Pages: 8
Vauxhall Astra 2021 Owner'S Manual preview
Astra 2021
Brand: Vauxhall Pages: 259
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
DFI VC230-BT Installation Manual preview
VC230-BT
Brand: DFI Pages: 6
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Westin 32-1660 Instructions preview
32-1660
Brand: Westin Pages: 3

Brands by name

Popular brands

Load more brands